Upgrading the Synology 1. And 3. 2)I own one of the first Synology NAS’s ever made, the 1. Synology stopped the development of new firmware for this model a few years back, but because many of the Synology devices are based on the same hardware it is still possible to upgrade the 1. This article will tell you in detail how to do this.
![Synology Download Station Not Working Dsm 4.0 Synology Download Station Not Working Dsm 4.0](http://blog.its-webtime.de/wp-content/uploads/2012/12/Synology-Cloud-Station-Client-3.png)
First of all. A disclaimer: I didn’t figure all this out myself. All credits should go to the active people on the Synology forums, especially Goetz.
- You have not yet voted on this site! If you have already visited the site, please help us classify the good from the bad by voting on this site.
- Download the free trial version below to get started. Double-click the downloaded file to install the software.
- Centralise and backup your digital contents, which you can share easily across platforms and devices. Diskless model – no hard drives are installed in the two bays a.
- When inserting a new (or in your case an “old” drive) all changes will be gone. The synology “firmware” is really an operating system, and not so much.
![Synology Download Station Not Working Dsm 4.0 Synology Download Station Not Working Dsm 4.0](http://www.synology.com/_images/tutorials/sync_multiple_nas/03.png)
All I did was to spend 8 hours figuring out how to collect all this info into one single text, and write it in a way that should be easy to understand if you know just a bit about Windows but perhaps not so much about Linux, telnet etc. Upgrading the firmware to these versions is NOT supported by Synology and it will void your warranty. You CAN loose all data on the disk easily, and it will not be easy to bring them back unless you know a lot about linux operating systems, have some sort of USB- SATA converter, and an extra pc for this job. I should also tell you that you might end up with a broken device that you will never be able to fix again. Depending on when you bought your device, and the size of the disk you use, the system partition may be too small to upgrade all the way to 3. The requirement is somewhere around 3.
MB, and I noticed that, when I did a complete reinstall on a 3. GB disk, that newer versions of the Synology Assistant and firmware, will create a 2.
Not sure, but what he is saying sounds like a problem I have had. When trying to download or view any files it downloads as “index.php” The file has gibberish in. NAS for sale at Lazada Philippines NAS Storage Prices 2017 Best Deals Free Shipping Effortless Shopping!
GB system partition. This leaves plenty of room, and you will not need to mess with moving partitions around later. The step simply consists of you doing the following: Take out the hard drive from the Synology device.
Connect it to a pc. Just make sure that you don’t delete your pc’s drives instead. If you don’t have a clue about what you are doing, then leave this step to someone who does.)Disconnect the drive, and insert it into your synology device again. Step 1 – Installation of official firmware. Using the Synology Assistant and the latest official firmware, install the device so it actually runs and can display the web interface.
Don’t set up all kinds of shared drives, photostation etc. Like in step 4.)Thanks goes to James for testing this out. EDIT 2. 9 july 2. Since 1. July 2. 01. The links in the forum post are dead since the site file- upload. This is a must have upgrade .
This enables installation of the firmware for the 1. To do this you follow these steps: Enable the telnet service on the Synology. You can do this from the web interface. Get a “terminal program” so you can connect to the Synology via telnet. You can use a program such as Putty to do this.
Log in as root NOT admin. Root and admin share the same password, but if you log in as admin you might not be able to save the file we need to edit. The Synology telnet is not exactly userfriendly, but when you log in you are located in the folder /root. You need to navigate to the /etc. This is easily done by typing. Both directories will look the same, and have a synoinfo.
This can be done using the built in editor vi. Simply type. vi synoinfo. Now. A quick guide is. The vi editor has a command mode, and and input mode. You switch to input mode by pressing the i key.
When you are in input mode everything you type is inserted as normal into the document. You go back into the command mode by pressing escape. The cursor keys navigate the document.
The x key will delete characters under the cursor when you are in command mode. You need to change the first line from: unique=. Press the x key twice to delete the “6e”. Press the i key, and enter a “7”. Now, to save the file, make sure you are in command mode (Press escape if in doubt.) and type: :wq. This tells vi to write and quit. If you messed something up just type: :q!
Then start over by typing vi synoinfo. Just type exit and the connection will close. Now your Synology device will think its a 1. This enables you to download the firmware for the 1. The firmware can be downloaded from Synologys own download site.
When the upgrade is complete you need to make a few changes again. Since your device is not really a 1. Repeat step section 3, 4 and 5 to edit the file again and change the following lines.
Your device must still think that it’s a 1. Now log into the web interface and do a reboot before you do anything else. Othervise you might end up with seeing things in the web interface that are not really working on your device.
Now you are at the 2. It’s fairly close to the earlier one, but the important thing is that you are now able to upgrade to 3. Step 4 – Upgrading to 1. Disk Station Manager 3. This step requires that you have more than 3. MB available on the system drive. You can check this by logging in via telnet and typing the command “df - h” (It will issue the disk free command showing you human readable numbers.) This is what it looks like on my device.
But of course things are never just that easy. So like in step 3 you need to: Log into your Synology device via telnet.
And edit the synoinfo. Edit the synoinfo.
Step 3. 9. However this time you will notice that you might be missing some of the lines. I didn’t worry about this and everything seems to work alright.
Again, do a reboot before you start setting up the Synology. You should now have the most recent firmware possible on your Synology 1. EDIT 2. 01. 2- 0. Warning. Updating to 3. LED’s keep writing error messages in the log every few seconds. A fix for this is found in the comment section, but since those were written Synology has removed the beta file required for that fix to work : -/ The files in the newer beta file (For 4. EDIT 2. 01. 1- 0.
An even higher revision was just released, and according to Tormods comment below, you can use the file DSM.